General Specifications

 

Model Engine Weight Front Wheel(s) Rides Curb Trims
 
150 B&S - 127CC  66 lb 1 - 7" x 1.5" No Yes
 
200 B&S - 127CC  67 lb 1 - 7" x 1.5" Yes Yes
 
200-4 B&S - 127CC  68 lb 2 - 7" x 1.5" Yes Yes
 
200-8 B&S - 127CC  68 lb 1 - 8" x 2.75" Yes No
 
300-H HONDA - 118CC  72 lb 2 - 7" x 1.5" Yes Yes
 
308-H HONDA - 118CC  72 lb 1 - 8" x 2.75" Yes No

 


All Power Trim edger frame components are 100% interchangeable - engine type and front wheel configuration determine the model number.

Manual clutch disengagement is standard on all models.

8" wheel models offer extreme versatility when edging curves and circles along with the capability to bevel cut 10 degrees left of verticle.

All curb riding units will edge while riding a 6" curb.

Using "Trim Mode" means no more hand clipping grass around poles and trees or along fences and walls - just turn the blade flat and mow.


Frame Specifications

 

Base 11 Gauge Steel, Stamped and Formed
Wheels 7" x 1.50" with Steel Hubs, Solid Rubber Tires and Ball Bearings
       (Note: 8" x 2.75" Front Wheels are 100 LB. Load Tires)
Cutter Bearing 1/2" Arbor, Permanently Sealed Water Pump Type
Blade 10" x 2" x 1/2" Arbor, .080 Thickness, Heavy Duty Spring Steel
Tilting Lever 7 Gauge, Three Piece Rigid Construction
Handle 3/4" OD Tubing, .074 Wall Thickness
Dirt Deflector 12 Gauge, Three Piece Rigid Construction
Motor Brace 7 Gauge Steel, Mounted From Handle to Engine
Sidearm Main Pivot Spring Loaded Shoulder Bolt
Throttle All Steel Mounted w/ Screws to Handle
Paint Baked Urethane Powder Coat Finish

 


Engine Specifications

 

Models: Engine:
 
150, 200, 200-4, 200-8: Briggs & Stratton - 127cc
Model 83132 Type 0224-F1
Recoil Starter, Plain Bearings
Lo-Tone Muffler
Fuel Capacity - 2.00 Quart
    
300-H, 308-H: Honda - 118CC
Model GX120K1QA2
Recoil Starter, Ball Bearings
Silent Muffler
Overhead Valve Engine
Fuel Capacity - 2.00 Quart

For All Engine Related Questions, Please Contact the Appropriate Manufacturer:

     
  http://www.briggsandstratton.com/engines/   http://engines.honda.com/  

   


-All Specifications Are Subject to Change Without Notice-